Mechaduino

01_and_02

Check out the Mechaduino Manual!

imgp1300

As seen on Kickstarter!

 

 

Mechaduino is an affordable open-source servo motor for DIY and professional mechatronics under development at Tropical Labs.  Mechaduino is Arduino-compatible for ease of use.

About:

Engineers use servo motors to achieve the precision motion required in applications such as robotics, automation, and CNC manufacturing.  Like RC servos, industrial servos actively correct for external disturbances.  Unlike RC servos, industrial servos can provide very accurate motion, and often support advanced motion control modes.  Unfortunately the cost of industrial servos is prohibitive to the individual maker.

Tropical Labs engineers have been developing an affordable open-source servo motor, opening the door to sophisticated mechatronics applications.  Our design leverages the low cost of mass produced stepper motors.  We are able to achieve very high resolution via 14b encoder feedback (after calibration routine!).

Goals: (in no particular order)

  • Position,Velocity,Torque loops
  • step,dir inputs for drop-in compatibility with stepper motors / step stick
  • customizable/open source with access to internal variables
  • Customizable and transparent control algorithms (commercial servos often lack this)
  • arduino compatible with easy to use interface
  • high resolution pointing
  • low cost (should not be a huge leap from stepper+stepstick cost)
  • serial interfaces for inter-motor communication
  • able to stand alone for simple applications
  • Adjustable commutation profiles
  • Anti-cogging capable
  • Open to customization. Outside of our firmware, we see mechaduino as a very useful hardware package.  If you would like to use the stepper motor in open loop mode w/ encoder to verify location, you can do that.

Application Examples:

  • Fine, closed loop positioning for 3d printers
  • Fine pointing for optics (laser, telescope, camera gimbal)
  • Velocity loop for a record player
  • Force feedback/impedance control for robotics
  • Adjustable mechanical impedance: virtual spring,mass,damper
  • Electrical gearing between two axis
  • Haptics
  • Tele-operation
  • Gravity-cancellation
  • Load detection and characterization (simple case: use as a scale!)
  • Paper towel/tp dispenser
  • Variable load (brake…)
  • Variable load (generator)
  • After market valve control

Other Advantages:

  • Finer resolution than steppers
  • True closed loop for disturbance rejection
  • Lower power consumption: only uses power to fight disturbances.  This in turn means higher peak torque
  • Absolute position control (not incremental)

 

https://www.youtube.com/watch?v=uq9ZJWuTsds&feature=youtu.be

 

 

Board Diagram: Mechaduino 0.1

Block Diagram: Mechaduino 0.1

Current Pin Diagram: Mechaduino 0.1

 

Next Gen Schematic: Mechaduino 0.1

IMGP1414

Mechaduino PCB Mounting

step_dir

Step/Dir Wiring Diagram

All Mechaduino related materials are released under the

Creative Commons Attribution Share-Alike 4.0 License

https://creativecommons.org/licenses/by-sa/4.0/

35 thoughts on “Mechaduino

  1. Ehi guys Trying to build myself a mechaduino

    What kind of spacers and magnet did you use for Nema 17 steppers ?

  2. Are the programs available for the YouTube videos you published?

    1. I’ll be posting more examples as soon as I have time. Right now we are focusing on making general improvements to the firmware.

Comments are closed.